Whelen RBKT1 User Manual download pdf

Page 1

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: (860) 526-9504

Fax: (860) 526-4078

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: (860) 526-9504

Fax: (860) 526-4078

Fig. 1

INSTALL

HERE

Installation:

This bracket can mount to many different vehicles. This manual will

cover mounting to a Ford Crown Victoria.

1. Open the hood and find the mounting area located just in front of the

vehicles horns as shown in Fig. 1. NOTE: While not essential,

removing the vehicle grill (following vehicle manufacturers

instructions) will make the installation easier. Place the bracket

onto the mounting surface in the exact mounting location. Mark off

(onto the mounting surface) the location of the mounting holes, then

remove the bracket and drill the mounting holes with an

appropriately sized drill for the hardware.

Automotive: Lightheads

Installation Guide:

TIR3™ Lighthead Mounting Bracket

Model RBKT1, RBKT2

ENGINEERING COMPANY INC.

Internet: www.whelen.com

Sales e-mail: autosale@whelen.com

Canadian Sales e-mail: autocan@whelen.com

Customer Service e-mail: custserv@whelen.com

Inc. Form No.13927A (062807)

NOTE: Model RBKT1 (single bracket) is

shown for example. Model RBKT2 (double

bracket), mounts the same way.

For warranty information regarding this product, visit www.whelen.com/warranty

2. Secure the lighthead to the bracket as

shown on the next page.

3. Secure the bracket to the vehicle using the

supplied mounting hardware.

4. Extend the lighthead wires to your power

source and refer to the lighthead manual

for wiring.