Whelen SAK24 User Manual download pdf

Page 1

Existing

Rivnut

Fig. 2

Existing

Rivnut

Fig. 2

1/4 - 20 X 1-1/2"

HEX HEAD BOLT

1/4 - 20 X 1-1/4"

HEX HEAD BOLT

1/4" SPLIT

LOCKWASHER

1/4" SPLIT

LOCKWASHER

Fig. 3

Form No.14117C (070909)

Installation Guide:

SA315 Siren Speaker Bracket

2007-2009 Suburban/Tahoe

ENGINEERING COMPANY INC.

Internet: www.whelen.com

Sales e-mail: autosale@whelen.com

Canadian Sales e-mail: au[email protected]om

Customer Service e-mail: custserv@whelen.com

For warranty information regarding this product, visit www.whelen.com/warranty

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: (860) 526-9504

Fax: (860) 526-4078

Automotive: Sirens & Switches

Installation:

1. Open the hood and remove the protective cover from the front of the engine compartment (Fig. 1). Refer to the vehicle owner’s manual.

2. Remove the existing bolt (Fig. 2) from the passenger side

radiator support and use it to secure the bracket to the vehicle.

IMPORTANT NOTE! This installation uses Rivnuts™ to secure

the bracket to the vehicle. This type of hardware requires the

use of a specialized installation tool. Refer to the owners

manual included with this tool for proper installation. Be sure to

follow the mounting hole specifications precisely!

3. With the bracket in its exact mounting location, mark off

the 2 bolt locations where you will install riv nuts then

remove the bracket.

4. Drill the 2 mounting holes (and widen the existing hole)

using a .391” drill bit and install the three Rivnuts.

5. Secure the siren speaker to the bracket with the supplied

hardware (Fig. 3). IMPORTANT: Refer to next page for

more information on mounting speaker to bracket.

6. Secure the bracket (with speaker) to the vehicle using the

three supplied 1/4 - 20 X 1” Hex Head Cap Screws and Internal Tooth Lockwashers.

7. Extend the WHITE (positive) and BLACK (negative) speaker wires to your siren amplifier and

connect as shown in the amplifiers instructions. Test the siren to confirm proper operation.

8. Reinstall the protective cover to complete this installation. Test all vehicle components and equipment before returning the vehicle to service.

1/4 - 20 X 1-1/2"

HEX HEAD BOLT

1/4 - 20 X 1-1/4"

HEX HEAD BOLT

1/4" SPLIT

LOCKWASHER

1/4" SPLIT

LOCKWASHER

Fig. 3

Form No.14117C (070909)

Installation Guide:

SA315 Siren Speaker Bracket

2007-2009 Suburban/Tahoe

ENGINEERING COMPANY INC.

Internet: www.whelen.com

Sales e-mail: autosale@whelen.com

Canadian Sales e-mail: au[email protected]om

Customer Service e-mail: custserv@whelen.com

For warranty information regarding this product, visit www.whelen.com/warranty

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: (860) 526-9504

Fax: (860) 526-4078

Automotive: Sirens & Switches

Installation:

1. Open the hood and remove the protective cover from the front of the engine compartment (Fig. 1). Refer to the vehicle owner’s manual.

2. Remove the existing bolt (Fig. 2) from the passenger side

radiator support and use it to secure the bracket to the vehicle.

IMPORTANT NOTE! This installation uses Rivnuts™ to secure

the bracket to the vehicle. This type of hardware requires the

use of a specialized installation tool. Refer to the owners

manual included with this tool for proper installation. Be sure to

follow the mounting hole specifications precisely!

3. With the bracket in its exact mounting location, mark off

the 2 bolt locations where you will install riv nuts then

remove the bracket.

4. Drill the 2 mounting holes (and widen the existing hole)

using a .391” drill bit and install the three Rivnuts.

5. Secure the siren speaker to the bracket with the supplied

hardware (Fig. 3). IMPORTANT: Refer to next page for

more information on mounting speaker to bracket.

6. Secure the bracket (with speaker) to the vehicle using the

three supplied 1/4 - 20 X 1” Hex Head Cap Screws and Internal Tooth Lockwashers.

7. Extend the WHITE (positive) and BLACK (negative) speaker wires to your siren amplifier and

connect as shown in the amplifiers instructions. Test the siren to confirm proper operation.

8. Reinstall the protective cover to complete this installation. Test all vehicle components and equipment before returning the vehicle to service.

1 2

Summary of Contents

Page 1 - ENGINEERING COMPANY INC

Page 1ExistingRivnutFig. 2Fig. 2Fig. 2ExistingRivnutFig. 2Fig. 2Fig. 21/4 - 20 X 1-1/2"HEX HEAD BOLT1/4 - 20 X 1-1/4"HEX HEAD BOLT1/4"

Page 2 - SA315 / Rear View

Page 2SA315 / Rear Viewwireexit &drainholeAAA A1/4" INTERNALTOOTH LOCKWASHERIMPORTANT: For drainage purposes, the speaker must be oriented so

Comments to this Manuals

No comments

Whelen SAK24 User Manual

Browse online or download User Manual for For the car Whelen SAK24. Whelen SAK24 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Whelen SAK24