Whelen M7FC700 User Manual download pdf

Page 1

Round Hole

Grommets

Mounting

Gasket

Flange

8 X 1 PPHSMS

Grommet

2.5"

7.5"

M7 Mounting Configuration

#8 X 1 PPHSMS

Form No.14337 (080409)

Automotive: Lightheads

Installation Guide:

700 Series to M7 Series Flange Adapter

Model M7FC700

ENGINEERING COMPANY INC.

Internet: www.whelen.com

Sales e-mail: autosale@whelen.com

Canadian Sales e-mail: autocan@whelen.com

Customer Service e-mail: custserv@whelen.com

For warranty information regarding this product, visit www.whelen.com/warranty

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: (860) 526-9504

Fax: (860) 526-4078

Mounting:

1. Remove the existing 700 series lighthead and gasket from the mounting surface.

2. Mark the M7 flange mounting hole locations onto the

mounting surface by using the flange as a

template or using the measurements

shown.

3. Drill four 1/4 inch mounting

holes and insert the four

supplied #8 round hole

grommets.

4. Insert the two #8 square grommets into the

flange and secure the lighthead to the flange

with two #8 X 1” sheet metal screws.

NOTE: Due to the mounting hole locations

for the M Series and the variety of lighthead

styles which may be replaced, cutting or

drilling may be required for the screws

going into the square grommets.

5. Secure the Flange and lighthead to the vehicle

with the 4 supplied #8 X 1” sheet metal screws

and round grommets you installed in step 3.

6. Extend the wires to your power source and

connect as shown in the lighthead manual.