Whelen 90193 User Manual download pdf

1.08

1.03

2.46

3.450

DIMENSIONS

MODEL 90193 - ( )

1.79

SPECIFICATIONS:

Nominal Operational Voltage: ........................................ 28 VDC

Average Input Current: ..................................................... 1 AMP

Lamp for all Units:....................................28VDC, 26 Watts Max.

EQUIPMENT LIMITATIONS:

An approved Anti-Collision / Position System consists of two

assemblies, one located on each wingtip.

INSTALLATION PROCEDURES: The following information is to

assist you in installing a Whelen Anti-Collision / Position light

system.

1) Choose the appropriate Model 90193 - ( ) replacement light

assembly.

2) The installation procedure described in the following text will

be confined to a single light installation, but is identical for

multiple light installation.

3) Remove old anti-collision light, locate and record existing

+28 VDC and (-) ground terminal block position and output

connector from power supply.

4) Use existing mounting holes and hardware.

5) Connect leads from light assembly to terminal block in

recorded manner and lead from light to power supply.

6) Breaker

Requirements

Make sure existing system is equipped with an appropriate

sized breaker.

7) Install light assembly and insure that all leads are clear of any

obstructions and ty-rap as required. Secure light assembly,

use lock washers and/or thread lock, on all threaded fasteners.

ineerin

Compan

Inc.

Form No.13302A (021198)

ENGINEERING COMPANY INC.

ROUTE 145, WINTHROP ROAD

CHESTER, CONNECTICUT 06412-0684

TELEPHONE:

(

860

)

526-9504

FAX:

(

860

)

526-4078

8) Check all avionics systems for interference from this

installation.

9) A flight check should be performed by a properly certified

pilot.

10) When necessary, waterproof the light assembly to aircraft.

Apply single part silicone (RTV) or equivalent around any

open area where water could get in.

11) Update aircraft records and complete Form 337.

12) Obtain FAA field approval for installation.

Installation Guide for Model 90193 -

(

)

Anti-Collision / Position Li

ht Assembl

MADE IN THE U.S.A.

FAA / TSO C30b TYPE 1 & 2

and

FAA / TSO - C96a

APPROVED

Model 90193 -

(

)

Anti-Collision / Position

ht Assembl

1 2

Summary of Contents

Page 1 - MODEL 90193 - ( )

1.081.032.463.450DIMENSIONSMODEL 90193 - ( )1.79SPECIFICATIONS:Nominal Operational Voltage: .... 28 VDCAverage Inp

Page 2 - MOUNTING PLAN

90193-()PARTS LISTDESCRIPTION#6-32 X 5/16 100°CSK PFHMSGASKET (W1283)LAMP, 28V (W1290-28)LENS, RED (W1284-R)LENS, GREEN (W1284-G)GASKET, FLASHTUBE JPA

Comments to this Manuals

No comments

Whelen 90193 User Manual

Browse online or download User Manual for Air equipment Whelen 90193. Whelen 90193 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Air equipment Whelen 90193